Wacom Port Devices Driver Download For Windows

Corporate installation of the DisplayLink graphics driver

Problem

When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues.

I want to install the DisplayLink graphics driver in a corporate environment where DTU devices are already connected to the PCs

Wacom Device Drivers Download In our share libs contains the list of Wacom Device drivers all versions and available for download. To download the proper driver by the version or Device ID. If not found in our garage driver you need, please contact us, we will help you in time, and updates to our website. Normally drivers are provided on a CD accompanying your Wacom device. If you do not have a CD you can proceed as follows: Navigate to the Wacom Drivers support page; Select the appropriate driver for your operating system and download it; Run the installer file - please note that the PC will need to be rebooted before continuing to complete.

Solution

Please see the DisplayLink corporate installation guide

Device is not connected (Windows 7)

Problem

After installing the Wacom tablet driver the pen tablet will not work properly and on trying to access the control panel (Wacom Tablet Properties) the following error appears:

Solution

On some versions of Windows, particularly Windows 7, this can happen if Windows is not fully updated.
The solution is to run Windows Update until you are sure that nothing is missing.

Alternatively you can apply these 3 updates individually:

KMDF - https://support.microsoft.com/en-us/help/2685811/kernel-mode-driver-framework-version-1-11-update-for-windows-vista-win

UMDF - https://support.microsoft.com/en-us/help/2685813/user-mode-driver-framework-version-1-11-update-for-windows-vista-windo

SHA-2 - https://docs.microsoft.com/en-us/security-updates/securityadvisories/2015/3033929

DTH 1152 Touch Screen not working with XenApp

The pen on the 1152 only works with XenApp if Windows Ink is disabled in the Wacom Tablet control panel because of a known issue between Citrix and Microsoft.
Due to the nature of XenApp and the way that it works with shared resources, Windows Ink is unable to work on a XenApp host.
By default the Wacom pen attempts to use Windows Ink, which is why it then works in XenApp when the use of Ink is disabled.
For touch the 1152 always uses Windows Ink for one and two finger inputs.
This issue has been reported to Citrix by multiple sources and we know that they are working with Microsoft to resolve it in a future update to XenApp.
At the time of writing (Nov 2018) there is no work-around for this issue - it depends upon Citrix and Microsoft between them to produce a solution in a later release of XenApp and/or Windows.

DTH-1152 Touch works on primary monitor instead of the extended screen

Windows touch input is mapped by the operating system. The Wacom driver attempts to override this but may not always be successful in certain environments.
Touch mapping is easily set by opening the Tablet PC Settings, selecting the Display tab, clicking the <Setup> button to configure pen and touch displays, and selecting Touch to calibrate.
This Touch calibration tool is hidden on Windows 10 and there is no way to access it through the Windows 10 menu system - it can only be accessed through the Run dialog.
The following commands will open the Tablet PC Settings window:

Windows touch display mapping is stored in the Windows registry as the device path and the video path. These paths are unique to each machine and device, so it cannot be shared between machines.
So, this mapping will need to be performed individually on each machine, but the settings will stay for that device as it is currently connected to the computer.
It is possible to write a script to create these registry keys without calibration, but this would need to be created by the local IT services.
Relevant information for these registry keys and the Tablet PC Settings shortcut can be found in the screenshot below.

DTU 1141 not recognised on Mac OS 10.13.6 High Sierra

DisplayLink has a FAQ for this issue.
Please see the necessary steps to get a DisplayLink capable display working on 10.13.6 athttps://support.displaylink.com/knowledgebase/articles/1854724.

DTU-1141 not recognised on Mac OS Catalina 10.15

Please see the following FAQ for proper driver functionality on Mac OS 10.15 Catalina:

DTU-1031X does not work on Mac OS 11

The DTU-1031X is not supported on Mac OS 11 - although the pen works the display will not.

Please note however that the later model DTU-1031AX is supported and works fine.

DTU/DTH/DTK Troubleshooting Guide

1. Ideally the DTU should be connected directly to a USB port on the PC using both cables. If it is necessary to use a USB hub it should be an A/C powered one.

2. For the DTU 1141 it is advisory to connect the second USB plug to make sure the unit is receiving enough power.

3. Ensure the latest release of the Wacom tablet driver is installed from the Wacom Drivers support page

4. Ensure the latest release of the relevant video driver for the particular DTU model is installed as below.

DTU 1031/1141

For Windows 10 Anniversary Update version 1607 no graphics driver is needed.
For all other versions the DisplayLink driver for these devices is available here: DisplayLink driver download

The DisplayLink driver appears in Programs and Features as 'DisplayLink Core Software'. Older releases also show a second entry for 'DisplayLink Graphics'

DTU 1031X

Please download the UV-A8301 USB 2.0 Display Adapter. (Please note that the MAC driver supplied in the download file is not compatible with the 1031X). Normally the MCT driver will update automatically to the latest version from the Internet if your PC is connected to it. The 1031X MCT driver will appear in 'Programs and Features' on your PC as 'Trigger External Graphics Family....' - see the screenshot at the bottom of this page

5. Reboot the PC after installing any of the above drivers

6. Check that the DTU appears as a 'Wacom Tablet' under Human Interface Devices in Device Manager. In most versions of Windows it should also appear as a USB Display Adapter as below

On Windows 10 Anniversary Update version 1607 it will appear under Display Adapters and also under Human Interface Devices as shown below.

7. Check that the DTU is recognised by Windows as a monitor in the Windows Screen Resolution dialog

8. Once the relevant drivers are installed please check that the 'Wacom Professional Service' service is running in Windows Services - if not then uninstall and reinstall the driver and check again.

9. For the DisplayLink driver there should also be a Windows Service called 'DisplayLinkManager' and this should also be running. If not start it manually.If it doesn't start automatically at the next reboot try uninstalling and re-installing the DisplayLink driver.

10. For the DTU-1031X the Wacom Professional Service should be running but there is no graphics driver service as such. You should however find a new purple icon in your system tray.Please see the 'Programs and Features' screenshot below for an illustration of what the icon looks like.

11. From the Wacom Desktop Center, under 'Backup Settings' select 'Reset settings' under 'Local backup'.

12. Calibrate the pen using the Wacom Tablet Control Panel which should appear in your Start menu as 'Wacom Tablet Properties' (this is not normally required but if your pen is out of line that it may help).

13. After completing the above tasks, if the signature capture window fails to appear or appears but does not ink then proceed as follows:

    • Uninstall and reinstall the tablet driver
    • If this fails then run the capture analyser test tool. If you can't find this in your list of programs then the executable is called 'FlCaptureAnalyser.exe' and can be found in either:

If you haven't installed the SDK (perhaps because you have sign pro PDF instead) please download the analyser from the Capture Analyser download link on our Test signature capture page.
After starting the capture analyser please select the 'Test Capture' option under the Service menu and then select 'wintab'.
Save the output in a text file and send it to us as an attachment on a support ticket.Support tickets can be created by clicking the 'Initial Support Request' button on our Support Page.
We will endeavour to respond within one business day.
Please note that you will need to register on the Developer Relations site first via the 'Login' link if you haven't already done so.

14. If none of the above actions resolves the problem then it will probably be necessary to enable driver logging and send the log files via a support ticket.

'Programs and Features' showing the Trigger Family video driver and Wacom tablet driver:

Enable driver logging

Driver version 6.3.36 and later

• Open the Wacom Desktop Center and select Support on the left
• Click on 'Driver logging'
• Press the 'Clear log files' button to remove the old logfiles from your logs folder
• Click the 'Logging' on/off switch - this enables logging and restarts the tablet driver
• When the driver has finished starting up, you should see new logfiles in the logs folder (the default is C:wacomlogs)
• Use the tablet until a problem occurs
• When the problem happens, press the 'Package log files' button to create a zip file, WacomLogs.waczip, on your desktop
• Send the zip file to the Wacom Support system by attaching it to your Support Ticket

The driver logs are created in C:WacomLogs and logs will continue to generate in that location until logging is disabled.
The logs only capture the Wacom driver's trace statements, the username of the current user session, the OS version of the machine in use, and theapplication name of the front-most application as that changes.

Driver version 6.3.28-3 and later

• Open the Wacom Tablet Preference Utility - this now has some controls to manage log files
• Press the 'Clear Logs' button to remove the old logfiles from your logs folder
• Check the checkbox: 'Diagnostic Logging On' - this enables logging and restarts the tablet driver
• When the driver has finished starting up, you should see new logfiles in the logs folder (the default is C:wacomlogs)
• Use the tablet until a problem occurs
• When the problem happens, press the 'Package Logs' button to create a zip file, WacomLogs.waczip, on your desktop
• Send the zip file to the Wacom Support system by attaching it to your Support Ticket

The driver logs are created in C:WacomLogs and logs will continue to generate in that location until logging is disabled.
The logs only capture the Wacom driver's trace statements, the username of the current user session, the OS version of the machine in use, and theapplication name of the front-most application as that changes.

Driver versions up to 6.3.27

Download the zip file debuggingProRegistryScripts.zip. This contains two reg files; one to enable logging and one to disable logging.
To use these, you have to manually create a folder for the logs.
The scripts use C:wacomlogs by default, but you can edit the scripts to use any folder with permissions.

1. Create the logs folder (see 1 above)
2. Stop the driver service
3. Execute the debuggingprofull.reg script to enable logging
4. Start the driver service
5. Run until the problem occurs
6. Create a minidump from the task manager as follows:
   1. Open Task Manager
   2. Select the Details tab
   3. Right-click on Wacom_Tablet.exe
   4. Select 'Create Dump File'
   5. The pop-up will indicate where the minidump file was written
7. Execute the debuggingprofullu.reg script to disable logging
8. Stop the driver service
9. Zip up the logs folder and the minidump
10. Add the zip file as an attachment to a Support Ticket.

Crash dumps

If you want to generate a crash dump from Internet Explorer please see these Microsoft instructions

Alternatively Procdump can be used to capture all crash dumps, including the full dump.

For example, use

in the Windows command line to set procdump as the last chance debugger. Removal is as simple as deleting the procdump executable when finished.

Installer Command Line Parameters

The parameters listed below can be passed in the command line to modify the driver installation process.
In the 'Example' column <Installer.exe> represents the installer file which was downloaded e.g.

C:Users<current user>DownloadsWacomTablet_6.3.36-1.exe

Silent installation or uninstallation of tablet and video drivers

As of release 6.3.21-3 the Wacom driver can be installed silently using the command shown below from a prompt with administrator privileges:

To uninstall silently simply add /u to the command above.

Alternatively (and for older releases) you can proceed as below:

• Rename the downloaded .exe extension to .zip, e.g. 'WacomTablet_6.3.21-3.exe' becomes 'WacomTablet_6.3.21-3.zip'
• Extract all the files and folders from the zip file
• Run 'setup.exe /silent (/uninstall)'

To install/uninstall the DisplayLink video driver silently (e.g. via SCCM or a batch script) you will need to use the DisplayLink corporate installer guide:

The silent installation switch for the MCT driver (for the 1031X) is '/s' - see also the MCT silent install command list:

Support for problems with the DisplayLink driver

DisplayLink do not provide support directly to end users. Some assistance is available from their DisplayLink Support Page.

A number of common problems are covered in the knowledge base. The forum contains a wide range of issues reported by DisplayLink users.

They also have a support tool which can be used to generate a log file which can then be forwarded to DisplayLink for their investigation or sent to us.
Please see How can I report Windows issues to DisplayLink?

Alternatively please raise a ticket on our system by clicking the 'Initial Support Request' button on our Wacom Support PageWe will endeavour to respond within one business day.
Please note that you will need to register on the Developer Relations site first via the 'Login' link if you haven't already done so.

Tablet installation

SYSTEM REQUIREMENTS

Wacom Tablet Driver

In terms of system specification there are no recommended RAM requirements for installing the Wacom tablet driver.
Our Pen Tablets use so few resources that we consider any computer that can operate a mouse and keyboard should be compatible with our tablets and drivers.

DisplayLink Graphics Driver

DisplayLink provide information about system compatibility with their graphics driver, which is required for some of our tablets (for more details see the overview below):
https://support.displaylink.com/knowledgebase/articles/544297-is-my-windows-computer-compatible-with-displaylink

MCT (Trigger Family) Driver

The recommended minimum hardware requirements for the MCT driver (required for the DTU-1031X) are as follows:

• Available USB 2.0 port
• 1~2 Displays (office application)
• CPU: Intel/AMD Single Core 1.5GHz or higher processor
• RAM: 1GB memory or higher
• It is not recommended to play DVD (720p) via USB port because the USB2.0 bandwidth is not adequate and the performance of playing the DVD may be poor
• Windows XP/Vista/7/8/8.1/10 (32-bit / 64-bit)
• Higher processor recommended for multi-displays and optimal performance

TABLET AND DRIVER OVERVIEW

Our most commonly used tablets for business purposes are the 1031X, 1031, 1141 and 1152 (in ascending order of resolution).
For the 1031X, 1031 and 1141 two drivers are normally required:

• Wacom tablet driver (to control features such as the pen and buttons)
• Graphics driver to handle the USB video

For DTH and DTK models no graphics driver is required because the graphics signal is carried separately via an HDMI cable, not via USB.
The tablet driver is the same for all pen tablets but the 1031X requires a different video driver from the 1031 and 1141.

Please note that these 2 video drivers are mutually incompatible and cannot normally be installed together (it may be possible on the very latest version of Windows 10 but is not recommended).
This means that you cannot use the 1031 or 1141 at the same time as a 1031X on the same PC.
The installation of the DisplayLink graphics driver is normally handled by the Windows platform when a compatible DisplayLink display is connected.
Windows 10 has included basic DisplayLink support since the Anniversary update.
On Windows 7, Windows Update will fetch the appropriate driver for you and install it, but the installation is not silent.

MANUAL DRIVER INSTALLATION

Normally drivers are provided on a CD accompanying your Wacom device. If you do not have a CD you can proceed as follows:

1. Navigate to the Wacom Drivers support page
2. Select the appropriate driver for your operating system and download it
3. Run the installer file - please note that the PC will need to be rebooted before continuing to complete this process
4. If using the 1031 or 1141 download the DisplayLink driver from http://www.displaylink.com/downloads/windows
5. For the DTU 1031X download the UV-A8301 USB 2.0 Display Adapter published on MCT's Web site. (Please note that the MAC driver included in the download file is not compatible with the 1031X).
6. Please note that the MCT driver will update automatically to the latest version from the Internet if your PC is connected to it.
7. Check that the installation was successful:
   • For the DisplayLink driver you should see an item called 'DisplayLink Core Software' in 'Programs and Features'. On old releases you will also see 'DisplayLink Graphics'
   • The 1031X driver will appear in 'Programs and Features' on your PC as 'Trigger External Graphics Family....' - see the screenshot at the bottom of this page.

Once the relevant drivers are installed please check that the 'Wacom Professional Service' service is running in Windows Services - if not please start it manually.
For the DisplayLink driver there should also be a service called 'DisplayLinkManager' and this should also be running.

For the DTU-1031X there is no service as such but you should find a new purple icon in your system tray.
Please see the 'Programs and Features' screenshot below for an illustration of what the icon looks like.
Before trying to capture a signature please check the following:

• The pen tablet in question is configured to operate as an extended desktop
• The tablet is displaying the Windows background
• The pen is calibrated - the calibration dialogue should appear automatically the first time you touch the pen on the tablet - if it does not please run it from the Wacom Control Panel

TROUBLESHOOTING

After completing the above tasks, if the signature capture window fails to appear or appears but does not ink then proceed as follows:

• Uninstall and reinstall the tablet driver
• If this fails then run the capture analyser test tool - this is called 'FlCaptureAnalyser.exe' and can be found in either:
  C:Program Files (x86)Common FilesWacomGSS
  or
  C:Program FilesCommon FilesWacomGSS (if you have run the 64-bit installer for the Signature SDK)
  If you haven't installed the SDK (perhaps because you have sign pro PDF instead) please download CaptureAnalyser from the Test signature capture page.

After starting the capture analyser please select the 'Test Capture' option under the Service menu and then select 'wintab' and attach the output as a text file to a Support Ticket.

If you have any difficulty with following the above procedure please raise a Support Ticket.

'Programs and Features' showing the Trigger Family video driver and Wacom tablet driver:

Test the correct functioning of a DTU

1. Check Device Manager to make sure that all HID displays are displayed without any incident (i.e. a yellow exclamation mark).

2. Check that the Wacom driver is operating correctly using one of the following methods:

• Open Wacom Desktop Center
• Go to 'Support', the button is on the left side pane
• Select 'Driver check'
• Click 'Start'
• If the next dialog says the check was successful, that is an indicator that the driver is not experiencing any problems

Another method is:

How To Download Wacom Driver

• Open the Wacom Tablet Properties
• Select the DTU device in the 'Device' row at the top
• Select the 'About' button
• Select 'Diagnose...' to see real time stylus input
• If you hold the CTRL button while selecting 'Diagnose' you will get what we describe as 'Raw' data - i.e. it is essentially unprocessed

Wacom tablet driver 6.3.30 requires .NET framework 4.5

.NET 4.5 is only required for the Wacom Desktop Center, which is included in the 6.3.30 driver package.
The Wacom Desktop Center software does not support the DTU-1141 or 1141B, so it is not necessary to install it for use with that device.
If the customer uses the '/opt nowdc' parameter during install they can exclude this software and .NET 4.5 will not try to install.

Example:

What graphics driver is required for my DTU?

In addition to the Wacom tablet driver the DTU 1031, 1141 and 1141B require the installation of the DisplayLink graphics driver

The 1031X and 1031AX (Adonis Light) require a different graphics driver provided by MCT.
For this please download the UV-A8301 USB 2.0 Trigger Family Display Adapter. (Please note that the MAC driver included in the download file is not compatible with the 1031X or AX).

All other DTU, DTH, and DTK tablets use a standard video connection such as DVI, HDMI, DisplayPort, or USB Type-C and do not require a supplementary video graphics driver.

PLEASE NOTE:
The DisplayLink and MCT drivers should not normally be installed together on the same PC because they are incompatible - in fact they mutually exclude each other at installation time.
It may be possible to avoid conflicts on the very latest releases of Windows 10 where DisplayLink have worked with Microsoft to provide support natively within Windows.

Wacom Device Driver Windows 10

With older releases of Windows installation of both drivers is not possible so in those cases the DTU 1031 and 1031X cannot be used together on the same computer.

Where are the log files for the DisplayLink driver installation?

The installation log files for the DisplayLink driver are called setupapi.xxx.log
(where 'xxx' could be for example 'offline' or 'setup' or 'dev' or 'upgrade')
and are found in C:WindowsINF

Windows cannot verify the digital signature for the drivers required for this device

Scenario

1. Wacom tablet driver has been installed on the PC
2. The appropriate graphics driver (MCT or DisplayLink) has been installed
3. Wacom Tablet Properties displays an error 'Your device is not connected to your computer'
4. Device Manager reports error 52: 'Windows cannot verify the digital signature for the drivers required for this device'
5. Windows Update KB 3153171 has been installed or is not appropriate for the computer

Wacom Port Devices Driver Download For Windows 7

Probable solution

It is very likely that the computer does not have the necessary SHA-2 driver signature support. This was distributed through Windows updates, and the customer can review their installed updates to see if it's installed.
SHA-2 driver signatures are required for all new hardware drivers produced after October 2014. SHA-2 driver signatures are native to Windows 8 and Windows 10, but not to Windows 7.
Without the necessary update, Windows 7 will believe that a driver signed with SHA-2 is invalid, as it will not recognize the signature.

Wacom Download Windows

More information on this can be found in Microsoft's Support articles for the associated KB updates here: https://docs.microsoft.com/en-us/security-updates/securityadvisories/2015/3033929